State of Art and Tailor made Back Draft dampers for perfect Ventilation



Remember that a backdraft damper is used to ventilate an area and serve as a neutralizer for odor and temperature. So utmost care ought to be taken while selecting the models and installing to avoid unnecessary complications.

18-3-2014 - Dampers are nothing but plates or valves used to regulate the flow of air in a duct, chimney etc. There is no ventilation project without the presence of dampers which cut off the central air-conditioning or regulates air to match the set temperature. They are either operated manually or automatically. Manual ones are operated by handles on the outside of the duct, whereas the motorized ones are operated by electric motors from the inside. A backdraft damper allows air to flow only in one direction and restricts the flow of air from the opposite side. The main advantage of this damper is that it does its job quietly and thus qualifies for a good household device. Installation of backdraft dampers is not a strenuous task and does not require a professional. Since there are many sizes available in the market, it makes easy for you to find the one that fits on your duct. Normally, the components used to manufacture such dampers, especially the springs and metal gauges, are of standard qualities to get a sturdy finish. There is no deformity or breakage afterwards. More importantly, during cold winters the backdraft dampers keep the outside cold air from passing through your house. In addition, if cooking odor becomes unbearable, the vent motor of the damper should be adjusted to subdue it.

When there are unused rooms in a house where the air gets musty and stale, the damper works in a superb manner to freshen up the dull air while stopping the reverse flow of outside air into the house. Dampers can be used both for residential and commercial purposes. One has to make sure about the spot where the dampers need to be fixed because the sizes are usually between 4 inches and 48 inches. For industrial use, heavy duty dampers are needed to be able to stop back flow at 20 inches water gauge static pressure.

Remember that a backdraft damper is used to ventilate an area and serve as a neutralizer for odor and temperature. So utmost care ought to be taken while selecting the models and installing to avoid unnecessary complications.

Visit www.firedamper.com and analyze your Ventilation requirements.<


Visit This Website